Visibility and access
Lit lots and entrances make it easier for customers, tenants, and staff to find parking, walk to the door, and navigate the site after dark.
Branch Electric provides professional commercial lighting, site lighting, parking lot lighting, light pole, warehouse, and industrial electrical services throughout Hamilton County, Marion County, and Central Indiana. From troubleshooting failed parking lot lights and replacing damaged fixtures to LED upgrades, light pole service, interior commercial lighting, and complete lighting systems for new construction, our licensed electricians help businesses keep their properties safe, functional, visible, and professionally illuminated.
Branch Electric already has an established Fishers location specifically associated with lighting, signs, residential service calls, and commercial service calls, so this page can reinforce commercial lighting as a clear service entity without feeling disconnected from the current site.
Branch Electric’s live service-area content already establishes Central Indiana coverage and specifically references Indianapolis, Fishers, Carmel, Noblesville, Zionsville, Greenwood, Avon, and Plainfield, so Claude should reinforce those locations without turning the copy into a repetitive city list.
Commercial Lighting
Branch Electric is a licensed electrical contractor working with commercial and industrial properties across Central Indiana. We repair, maintain, replace, and install lighting — inside the building and across the site.
When a parking lot goes dark, when half the fixtures in a warehouse are out, when an office suite needs a full retrofit, or when a new building needs its lighting and site electrical put in from scratch, that is our work. We serve business owners, commercial property owners, property managers, facility managers, general contractors, and developers throughout Hamilton County, Marion County, and the surrounding Central Indiana area.
Our commercial lighting work covers parking lots and exterior sites, light poles and pole-mounted fixtures, building exteriors, office and retail interiors, warehouses, and industrial facilities.
Failed fixtures, flickering lights, dark sections of a lot, tripping circuits, and control problems — diagnosed and corrected.
Planned service so lighting is addressed on a schedule instead of one emergency call at a time.
Aging and obsolete fixtures replaced, including LED retrofits for interior, exterior, and pole-mounted lighting.
Lighting, circuits, controls, and site electrical installed for new buildings, build-outs, and site development.
Site Lighting
Site lighting is the first thing customers and employees notice after dark and the first thing they complain about when it fails.
Branch Electric services the lighting across commercial properties in Central Indiana — parking lots, drive lanes, perimeter and area lighting, building-mounted exterior fixtures, and the wiring and controls behind them.
Lit lots and entrances make it easier for customers, tenants, and staff to find parking, walk to the door, and navigate the site after dark.
Evening hours, shift changes, deliveries, and weekend traffic all depend on the site being usable when the sun is down.
Dark patches, mismatched color temperatures, and half-lit poles read as deferred maintenance. Even coverage looks intentional and maintained.
Light Poles
Pole lighting fails in stages. One fixture goes out, then another, then a whole run stops working — and by then the cause could be the fixture, the driver, the photocell, the wiring in the pole base, or the circuit feeding it. Branch Electric works through pole-mounted lighting to find where the problem actually is.
Pole-mounted fixture repair, LED driver and lamp failures, photocell and control problems, and wiring faults between the panel, the pole base, and the fixture head.
Replacing failed or obsolete pole fixtures, including converting older metal halide or high-pressure sodium heads to LED where the pole and circuit support it.
Recurring service across a property so failed heads are found and addressed together rather than one call at a time — useful on larger lots with many poles.
Electrical work for pole lighting replacement projects and new pole lighting on commercial sites, coordinated with the rest of the site electrical scope.
A note on scope. Pole lighting projects vary widely. Pole height, condition, foundation and structural questions, site access, and the equipment needed to reach a fixture all affect what a project involves and who needs to be involved in it. Some work is straightforward electrical service; some requires additional trades, specialized equipment, or engineering review. We evaluate the site and tell you plainly what the project needs before anything is scheduled.
Repair
A commercial lighting electrician repairs the fixtures, wiring, circuits, and controls that make a building's lighting work — not just the fixture itself. That includes lights that will not turn on, flickering or cycling fixtures, failed LED drivers and ballasts, damaged fixtures, breakers that trip when lighting is switched on, malfunctioning photocells and timers, and sections of a parking lot or building that have gone dark.
The visible symptom rarely identifies the cause on its own, so the repair starts with diagnosis.
Two properties with the same symptom often need two different fixes. We diagnose before we quote a repair, and when a fixture has reached the point where replacement makes more sense than another repair, we say so.
Maintenance
Lighting is easy to defer until it fails all at once. Handling it on a planned basis is usually less disruptive and easier to budget than reacting to outages.
Branch Electric works with property managers, facility managers, business owners, and commercial property owners across Central Indiana to keep lighting in service — particularly on properties with a lot of fixtures, where failures accumulate quietly until a tenant or customer complains.
Scope and scheduling are set per property. Tell us how many buildings, poles, and fixtures are involved and what has been failing, and we will work out an approach that fits the site.
Replacement & LED
At some point repairs stop being the economical answer. Obsolete fixtures get harder to source parts for, output drops, color shifts, and the maintenance calls get more frequent. Replacement resets that.
Older metal halide and high-pressure sodium equipment on lots and buildings, replaced with LED fixtures where the existing poles, mounting, and circuits support it.
Troffers, wraps, cans, and older fluorescent equipment in offices, retail spaces, and common areas — replaced or retrofitted depending on the existing housings.
Mixed color temperatures and uneven brightness across a property are one of the clearest signs of piecemeal replacement. Standardizing fixtures corrects it.
Some equipment accepts a retrofit kit; some is better replaced outright. Which applies depends on the housing, its condition, and how it was wired.
Photocells, timers, contactors, occupancy sensors, and zone switching, installed where they are compatible with the fixtures being used.
Better light quality, more consistent output, a more current appearance, and — depending on the equipment replaced — fewer service calls. We will not quote you an energy-savings percentage we cannot support; we will show you the fixture specifications instead.
Interior
Interior lighting affects how a space works all day — how people see their work, how products look, and how a business presents itself.
Branch Electric installs and upgrades interior lighting for offices, retail spaces, restaurants, professional buildings, medical and care environments, commercial common areas, and tenant spaces throughout Central Indiana.
When a suite changes hands or a space is being reworked, lighting usually moves with the walls. Our commercial build-out and tenant improvement electrical services cover the lighting alongside the rest of the electrical scope.
Warehouse & Industrial
Large open spaces have their own lighting problems: high mounting heights, rack shadows, mixed-age fixtures, and areas that were lit for a use the building no longer has.
Lighting work in these facilities often runs into the rest of the electrical system, and we handle that supporting work — circuits, panels, and distribution — as part of the project.
On specialized environments. Facilities with classified or hazardous locations, specialized process areas, or unusual environmental conditions have requirements beyond standard commercial lighting. Tell us what the space is used for and we will confirm what the scope involves before work is planned.
New Construction
General contractors, builders, developers, and project managers need a lighting subcontractor who shows up when the schedule says so and coordinates with the trades around them.
Branch Electric handles lighting and site electrical for new commercial construction across Central Indiana — new buildings, additions, parking lots and site development, tenant build-outs, retail spaces, offices, and warehouses.
Parking lot and site lighting, pole lighting circuits, building exterior fixtures, and the controls that switch them — planned with the site work rather than added at the end.
Fixture layouts, switching and zoning, and lighting controls installed to the drawings and coordinated with ceiling, mechanical, and finish work.
The distribution behind the lighting — panels, circuits, and feeders sized for what the building will actually run.
Shell-to-suite work where lighting, power, and controls are installed for a specific tenant's layout and schedule.
For projects that go beyond lighting, see our commercial build-out and tenant improvement electrical services.
Supporting Electrical
Lighting problems frequently turn out to be distribution problems. A lot that keeps going dark, a zone that trips every time it is switched on, or a new run of fixtures with nowhere to land all point past the fixture and back toward the panel.
Because we are an electrical contractor rather than a fixture installer, that work stays in-house: circuits and dedicated circuits, breakers and panels, power distribution, service upgrades, troubleshooting, corrections for conditions found during the work, and the electrical scope that comes with commercial remodels.
If a project points toward capacity, see our electrical panel upgrades and inspections, or the full list of Branch Electric electrical services.
Who We Work With
Commercial lighting work rarely involves just one decision-maker. We are used to working with the owner, the manager, and the contractor on the same project, and adjusting to how each of them needs the work handled.
Commercial property owners, property managers, and facility managers responsible for keeping buildings and sites in service — often across more than one property.
General contractors, builders, developers, and project managers who need lighting and site electrical delivered on a construction schedule.
Operators who need their space lit properly for how the business actually runs — including evening hours and shift work.
Why Branch Electric
One electrical contractor for the lighting across your property and the electrical system behind it.
We work throughout Hamilton County, Marion County, and the surrounding communities — close enough to be practical for both scheduled maintenance and problems that need attention.
Licensed electrical work on commercial and industrial properties, not lighting treated as a standalone product install.
Parking lots, poles, and building exteriors alongside offices, retail, and warehouse interiors — one contractor for the whole property.
A single failed fixture, a full property retrofit, or lighting and site electrical on a new build. The same team covers all four service types.
Circuits, panels, controls, and distribution issues are addressed as part of the work instead of becoming someone else's ticket.
We are accustomed to working with general contractors, property managers, and other trades, and to sequencing work around occupied buildings and construction schedules.
Service Area
Branch Electric provides commercial lighting, site lighting, and light pole services throughout Central Indiana, with Hamilton County and Marion County at the center of our service area.
Commercial corridors and business parks in Fishers, Carmel, Noblesville, and Westfield — parking lot lighting on retail and office sites, interior lighting upgrades in professional buildings, and lighting for build-outs in newer commercial development.
Commercial property lighting across Indianapolis, including older buildings and sites where lighting, wiring, and distribution have all aged together, along with warehouse and light industrial facilities.
We also work in Zionsville, Greenwood, Avon, Plainfield, and other nearby Central Indiana communities for commercial and industrial lighting projects.
To confirm coverage for a specific property, review our Central Indiana service areas or call and we will tell you directly.
Project Gallery
A look at commercial and industrial lighting work completed by our team — exterior and site lighting, interior commercial spaces, and warehouse facilities.
Questions
Yes. Branch Electric repairs parking lot and site lighting for commercial properties across Central Indiana, including pole-mounted fixtures, area lighting, and building-mounted exterior lighting.
Because a dark lot can be caused by the fixture, the wiring, the circuit, or the controls, repairs start with troubleshooting to identify where the fault actually is.
Yes. We repair pole-mounted fixtures, replace failed or obsolete heads, and upgrade older pole lighting to LED where the existing pole and circuit support it.
Pole height, condition, site access, and the equipment needed to reach a fixture all affect the scope of a project, so we evaluate the site and confirm what the work involves before scheduling.
Common causes include failed lamps or LED drivers, damaged or water-intruded fixtures, faulty photocells and timers, wiring or connection failures in the pole base or underground circuit, and tripped or failed breakers.
The pattern helps narrow it down: one dark pole usually points to the fixture, while an entire section going out more often points to the circuit or the controls. Confirming the cause requires testing on site.
Yes. Older metal halide and high-pressure sodium parking lot fixtures can typically be replaced with LED fixtures, and LED equipment is what we install on most exterior projects today.
Whether existing poles, mounting hardware, and circuits can be reused depends on their condition and configuration, which we check as part of evaluating the property.
Yes. We provide commercial lighting maintenance for property managers, facility managers, and commercial property owners, including fixture inspections, group replacement of failed lighting, and troubleshooting of repeat failures.
Scope and scheduling are arranged per property based on the number of buildings, poles, and fixtures involved and what has been failing.
Yes. Branch Electric installs lighting and supporting electrical for new commercial construction, additions, parking lots and site development, and tenant build-outs.
We work with general contractors, builders, developers, and project managers, coordinating lighting, circuits, controls, and distribution with the construction schedule.
Yes. We replace and upgrade interior lighting in offices, retail spaces, restaurants, professional buildings, and commercial common areas, including LED replacements for older fluorescent and legacy fixtures.
Whether a fixture is retrofitted or replaced outright depends on the existing housing, its condition, and how it was wired.
Yes. We install and replace warehouse and industrial lighting, including high-bay and low-bay fixtures, aisle and storage area lighting, and work-area lighting for shops and production space.
Where additional lighting requires new circuits or distribution work, we handle that as part of the project.
High-bay lighting is lighting designed for spaces with tall ceilings — generally warehouses, manufacturing floors, gyms, and similar buildings — where fixtures are mounted well above the working surface.
The fixtures are built to distribute light effectively from that height. Lower-ceiling spaces typically use low-bay fixtures instead, which are designed for shorter mounting heights.
Yes. Circuit and control troubleshooting is a core part of our commercial lighting work, including breakers that trip when lighting is switched on, zones that will not energize, and photocell, timer, or contactor problems.
Since lighting faults often trace back to wiring or distribution rather than the fixture, diagnosis comes before any repair recommendation.
Yes. Property managers, facility managers, and commercial property owners are a significant part of who we work with, often across multiple buildings or sites.
We are used to coordinating access, working around occupied spaces and business hours, and reporting back on what was found so the next phase can be planned.
Yes. We install lighting, switching, and controls for tenant improvements and commercial build-outs, coordinated with the layout and schedule of the project.
Lighting is usually one part of a larger electrical scope on these projects, which we handle through our commercial build-out and tenant improvement services.
Yes. We handle exterior site lighting — parking lots, poles, and building-mounted fixtures — as well as interior lighting for offices, retail, common areas, and warehouse space.
Keeping both with one electrical contractor means the lighting across a property can be addressed together rather than split between vendors.
Branch Electric serves Central Indiana, with a primary focus on Hamilton County and Marion County. That includes Indianapolis, Fishers, Carmel, Noblesville, Westfield, and Zionsville, along with nearby communities such as Greenwood, Avon, and Plainfield.
To confirm coverage for a specific commercial property, call (463) 210-1544.
Next Step
Parking lot lighting, light pole service, commercial interior lighting, and warehouse and industrial lighting — repair, maintenance, replacement, and new installations for commercial properties across Central Indiana. Tell us what is out, what is aging, or what is being built, and we will take it from there.
Serving business owners, property managers, facility managers, contractors, and developers across Hamilton County, Marion County, and Central Indiana.
Branch Electric provides commercial lighting, site lighting, parking lot lighting, light pole, warehouse, and industrial electrical services throughout Hamilton County, Marion County, and Central Indiana, including:

Carmel
Fishers
Noblesville
Zionsville
Westfield
Indianapolis
Greenwood
Avon
Plainfield
Surrounding communities
From parking lot lighting and light pole repairs to warehouse lighting, commercial interior upgrades, LED replacements, and new construction, Branch Electric provides professional commercial lighting and electrical solutions across Hamilton County, Marion County, and Central Indiana.

Innovation
Fresh, creative solutions.

Integrity
Honesty and transparency.

Excellence
Top-notch services.

Copyright 2025 | Branch Electric | All Rights Reserved